Reset to factory default, Led indicators – ACTi ENR-1000 User Manual
Page 19
ENR-
1000 Series System Administrator’s Manual
Reset to Factory Default
By resetting this device, all your system settings will return to factory default, while the
previous recording files are still kept on storage disks. It is strongly recommended that you
back up previous settings with
Backup
function
before resetting to factory default.
1.
To begin, please turn off the unit first.
2.
Press down the
Power Button
to boot up
the unit, immediately press and hold the
Reset Button
with a pin or clip, the orange
System LED
will light up for about 2~3
seconds, and you may release the
Reset
Button
as the light is off, the unit will start
the resetting process.
After the unit automatically reboots, the resetting process is done and you may log in.
LED Indicators
The LED indicators on front panel show the current device status:
Item
Indicator Status
Light Color
Description
Power LED
Solid
Blue
The device power is on.
System Status
LED
Lights up for three
seconds after
Reset
Button
is pressed
Orange
The system resetting process is
initializing.
Solid
The system service is running.
HDD LED
Flashing
Green
The hard disk is in activity.