Change port setting, Enr- 1000 series system administrator’s manual – ACTi ENR-1000 User Manual
Page 54
ENR-
1000 Series System Administrator’s Manual
Subnet Mask
Used to define if the destination is in the same subnet.
LAN1
default
is
255.255.255.0
;
LAN2
default is
Auto
.
Gateway
A valid gateway setting is essential for data transmission between
different subnets, such as accessing the DNS service or SMTP
server on the Internet.
LAN1
default is
192.168.0.254
;
LAN2
default is
Auto
.
DNS Setting
Primary DNS Server
Secondary DNS Server
The DNS server that translates domain names to actual IP
addresses. If this LAN is
Manual
mode, and you will set an SMTP
server for event notification, be sure to set the Primary DNS and
Secondary DNS.
LAN1
default is
Manual
;
LAN2
default is
Auto
.
Default Gateway
Choose the gateway of the LAN card whose network is to connect
with Internet. Default uses
LAN2
’s setting
.
Change Port Setting
The default connection port used for remote web client to communicate with ENR is
80
. To
change it, click “Port Mapping”
to modify and save the setting.