ACTi ENR-1000 - Manual (Page 121)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
121
Set Recording Schedule
For the recording schedule, ENR supports Schedule recording , Event recording and
Event Speed-up Recording modes, which are set up on a week-based timetable; the
event-handling schedule is configured here.
On ENR, you can configure camera ’s recording schedule on 7 days / 24 hours basis. The
schedule is split into segments of one-hour-length. By default, once a device is added to the
system, its schedule is automatically set to full-time schedule recording and event handling.
You should configure it according to your system plan.
Go to Setup page  Schedule tab, and select a camera to configure its recording schedule.
Event-Recording File Length
Before setting the recording schedule, you may define the length of an event recording. To do
this, configure the following properties shown as below, which will make an event recording
as long as 10+30 second: