Setup the system, Set system name – ACTi ENR-1000 User Manual
Page 94
ENR-
1000 Series System Administrator’s Manual
Setup the System
Before adding cameras to the system or starting up the recording and event handling, it is
essential to configure certain system-wise settings on
Setup
page.
Set System Name
Go to
Setup
page
System
tab
Information
Modify the name of this ENR server and click
“
Save
”. The maximum length is 10 digits of
English alphabets.
Your ENR
’s current firmware version, serial number and MAC address are also shown here.
Maximum length:
10
digits
This manual is related to the following products: