Enterasys Networks Enterasys Matrix 6H352-25 - Manual (Page 53)

FLASH Memory Upgrade
Mode Switch Bank Settings and Options B-5
B.3.2 Installing the FLASH Memory
To install a FLASH memory, refer to Figure B-3 and proceed as follows:
1. With the FLASH memory oriented as shown in Figure B-3 , insert the FLASH memory down
between the connector.
2. Pivot the FLASH memory downward so the connector clips align with the two side notches of
the FLASH memory and the connector clips lock the FLASH memory into place.
Figure B-3 Installing the FLASH Memory
CAUTION: Observe all antistatic precautions when handling sensitive electronic
equipment.
FLASH
1
2
Connector Clip
Clip
3547_11