Enterasys Networks Enterasys Matrix 6H352-25 - Manual (Page 36)

Completing the Installation
3-10 Installation
3.6 COMPLETING THE INSTALLATION
After installing the 6H352-25 and making the connections to the network, proceed as follows:
1. If the chassis is installed in a rack that has strain-relief brackets, secure the cables by running
the cables along the strain-relief bracket and tying them to the bracket using cable ties.
2. The 6H352-25 is now ready to be configured through Local Management. Refer to the MATRIX
E7 Series and SmartSwitch 6000 Series Modules Local Management User’s Guide for
information on how to access and use Local Management. For details on how to obtain manuals,
refer to the
Related Documents section in About This Guide .