Welltech ePBX40 V.2.0 - Manual (Page 81)

Welltech Technology Co., Ltd. 81
3.5 Management
The management screens can help you to configure Time, Security, Firmware Upload,
Music Upload, Import, Export, Rest to Default, Soft Reset and Reboot system.
3.5.1 Time Setting
To select correct Time Setting for ePBX40, the time will affect CDR time display. And you
can also check the system current time here. To change your Time Setting, click
Management, and then click the Time Setting table. The screen appears as follows.
Figure 3.5.1-1 Time Setting
The following table describes the features in this screen.
Table 3.5.1-1 Time Setting
Label Description
Time Setting
NTP Client Select Enable option if you will use NTP client. The default is
Enable.
Remote NTP Server Enter the IP address or URL for your time server. Check with
your SIP/Network administrator if you are not sure of this
information.
The default is 168.95.195.12.