Welltech ePBX40 V.2.0 - Manual (Page 55)

Welltech Technology Co., Ltd. 55
3.2.5 SIP Trunk
SIP Trunk account is to configure both external FXO Trunk (FXO device, e.g. WellGate
2540 or 2680) and IP Trunk to register to ePBX40 or set up some necessary configuration
for SIP trunk. To change your SIP Trunk, click Configuration, and then click SIP Trunk
table. The screen appears as shown below.
Figure 3.2.5-1 SIP Trunk
The following table describes the table in this screen
Table 3.2.5-1 SIP Trunk
Label Description
Select Select this check box to modify or delete.
Trunk Number This field shows the Trunk Number information.
Comment This field shows the Comment information.
NAT Traversal This field shows the NAT Traversal Enable/Disable information.
Dial Plan This field shows the Dial Plan information includes routes plans.
Maximum Channels This field shows the Maximum Channels (Simultaneous
concurrent call) at this SIP Trunk.
Add Click Add button to display new SIP Trunk Setting screen.
Modify A SIP Trunk Number can be modified by clicking checkbox next
to the Trunk Number and click Modify button.
Delete A Trunk Number can be deleted by clicking the checkbox next
to the Trunk Number and click the Delete button.
Total Count This field shows Total SIP Trunk Count information.
Number Search Enter the search Trunk Number, then click enter key. The
screen will display matched search Trunk Number.
Total Page This field shows Total Page information.
Page This field shows Page Number information. You can Enter page
number, then click enter key. The screen will display this page
data.