Welltech ePBX40 V.2.0 - Manual (Page 125)

Welltech Technology Co., Ltd. 125
Configure of this case (see figure 1):
1. Introduction of network environment
 ADSL Modem for EPBX40 WAN port and Router (with DHCP server) use. (set
for static IP or PPPoE, we suggest you to use static IP, for instance: we set
WAN IP is 61.218.42.211, subnet mask is 255.255.255.240, default
gateway is 61.218.42.209
)
 DHCP server for IP Phone or PC to use in private network
( For instance: we set IP range is 192.168.1.2 ~192.168.1.123 for static
IP and 192.168.1.124~192.168.1.254 for DHCP )
 EPBX40 LAN port used static IP 192.168.1.123 (default is
192.168.123.123)
2. Start to configure EPBX40
Step 1: to connect LAN port IP with 192.168.123.123 by IE browser.
Step 2: to be changed LAN port IP to 192.168.1.123 / subnet mask
255.255.255.0, WAN port IP to 61.218.42.211, subnet mask
255.255.255.240, default gateway 61.218.42.209.
(see figure 2)