Welltech ePBX40 V.2.0 - Manual (Page 15)

Welltech Technology Co., Ltd. 15
2.1.2 Extension Configuration
Both Line Setting (built-in 4-port FXO Gateway) and external SIP extensions (up to 60
IP devices) have to configure its unique account to register on ePBX40. To configure
Extension account, click Configuration, and then click the Extension table. The screen
appears as follows.
Figure 2.1.2-1 Line Setting (up to 4 Lines)
Line Setting (built-in 4-port FXO Gateway) only support configuration built-in up to 4
Lines FXO gateway parameters. Both External FXO Gateway device (via local LAN port)
and Remote FXO Gateway devices (via Internet) register on ePBX40, Only use SIP Trunk
command to configure.
Figure 2.1.2-2 SIP Extension (up to 60 external IP devices)
The following table describes the features in this screen.
Table 2.1.2-1 Line Setting
Label Description
Select
Select this check box, then modify or delete each FXO line. The
total amount was limited to 4.
Line ID
This field shows the Line ID from 1 to 4 which is reference to
connection port at front and rear panel.
Line Number
This field shows the Line Number which is not a PSTN number
or PBX extension number.
Instead, this number is for ePBX40
internal SIP account used only.
Comment
This field shows the remark information such as user name,
PSTN line number or PBX’s extension number for system