Eagle Electronics IntelliMap 320 - Manual (Page 95)

89
3. You can return to this command and press ENT again to turn the fea-
ture on.
Software Version Information
From time to time, Eagle updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.eaglesonar.com.
These upgrades make the unit perform better or introduce a new fea-
ture or function. You can find out what software version is running in
your IntelliMap 320 by using the Software Information command.
System Setup command, left; Software Information command, center.
At right, the Software Information screen.
1. Press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
S OFTWARE I NFO
| ENT .
2. Read the information displayed on the screen.
3. To return to the last page displayed, press
EXIT | EXIT | EXIT .
Sounds and Alarm Sound Styles
Sounds triggered by key strokes and alarms can be adjusted:
You first press MENU | MENU |
↓ to
S
OUNDS
| ENT .
Sounds command, left. At right, the Sounds menu.
Once in the Sounds menu:
To set Key Press Sounds: With the option highlighted, press ENT to
check it (turn on) and uncheck it (turn off.) After the option is set, press
EXIT | EXIT to return to the page display.