Eagle Electronics IntelliMap 320 - Manual (Page 102)

96
Find Address Menu.
4. To enter a street name, press
↓ to
S
TREET
| ENT . There are two op-
tions: A. You can spell out the name in the top selection box. Press
↑
or
↓ to change the first letter, then press → to move the cursor to the
next letter and repeat until the name is correct, then press ENT | ENT . B.
Jump down to the lower selection list by pressing ENT , then press
↓ or ↑
to select a street name from the list, then press ENT . The street name
you selected is now in the street field.
Find Address menu, left; Find Street menu, center,
with Find By Name field active; street name entry complete, right.
5. To enter a city name, press
↓ to
C
ITY
| ENT . You will be asked if you
want to find addresses only within a particular city. This option is de-
signed so you can limit an address search to a single city if necessary
(see the note below.)
If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press
↑ or ↓ to change the first letter, then
press
→ to move the cursor to the next letter and repeat until the name
is correct, then press ENT | ENT . B. Jump down to the lower selection list
by pressing ENT , then press
↓ or ↑ to select a city name from the list,
then press ENT . The city name you selected is now in the city field.
NOTE:
We recommend that you do
not enter a city name unless the list you
are given is too large when searching without it. This unit can ac-
tually search quicker without a city and you save time by not en-
tering a city name.