Eagle Electronics IntelliMap 320 - Manual (Page 79)

73
lighted and flashing, press ENT to open a list of options. Scroll
↑ and ↓
to select a different display option, then press ENT . After all options are
set, press EXIT to return to the page display.
Customize Map Page
While on the Map Page, press
PAGES |
↓ or ↑ to select Option Name|
ENT .
DGPS Status
The DGPS Status screen shows whether DGPS is off or on, and it de-
scribes the quality of the DGPS signal. This screen is useful if you have
to diagnose a DGPS problem.
1. Press MENU | MENU |
↓ to
GPS S ETUP
| ENT |
↓ to
DGPS S TATUS
| ENT .
2. The DGPS Status screen is displayed. To return to the previous page,
press
EXIT | EXIT | EXIT .
GPS Simulator
The GPS simulator lets you use the IntelliMap 320 as if you were out-
doors navigating somewhere. It's a great way to practice using your unit.
You can set the starting location by entering latitude/longitude (Starting
Position) or from a stored waypoint, map place or POI location (
C
HOOSE
S TART
command). You can steer your position and change speed on the
map by using the arrow keys ( S TEER WITH A RROWS
command) or by setting
the track and speed in the dialog boxes provided on the simulator menu
screen.
To get to the GPS Simulator:
1. Press
MENU | MENU |
↓ to
GPS S
ETUP
| ENT .
2. Press
↓ to
GPS S
IMULATOR
| ENT . The GPS Simulator Menu appears.
GPS Setup Menu, left; GPS Simulator menu, right.