Eagle Electronics IntelliMap 320 - Manual (Page 67)

61
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.87 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.
Trails
Delete a Trail
This is the command used to erase or delete a trail:
Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT |
↓ to trail name|
ENT |
→ to
D ELETE T RAIL
| ENT |
← to
Y ES
| ENT .
Tip:
You can also delete all trails at once:
1. Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT .
2. Press
→ to
D
ELETE
A
LL
| ENT |
← to
Y
ES
| ENT .
Edit a Trail Name
To edit a trail name: press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail
name|
ENT | ENT . Press
↑ or↓ to change the first character, then press
→ to the next character and repeat until the name is correct. Press
ENT
then EXIT | EXIT | EXIT | EXIT to return to the previous page display.
Figure 4. Figure 3.
Figure 2. Figure 1.