Watson-Marlow DuCoNite 25 - Manual (Page 62)

SPECIFICATIONS
62
10.3 Gearbox
Co-axial gearbox with helical gears. Standard as a 2 and 3 stage version.
10.4 Electric motor
Standard electric motor design is an enclosed three-phase asynchronous motor. A
thermal safety device to prevent motor overload is optional.
Shell Shell Cassida Fluid GL
460
Klüber Klüber-Summit HySyn
FG32
Klüber oil 4UH1-460 Klüberbio CA2-460
Aral Aral Eural Gear 460 Aral Degol BAB 460
Texaco Cetus PAO 46
Optimol Optileb GT 460 Optisynt BS460
* For a complete overview of the recommended lubricants contact your Bredel representa-
tive.
** For use in the foodstuffs industry. Meets the requirements of the USDA (United States
Department of Agriculture): lubricant is suited for unforeseen contact with foodstuffs.
*** Lubricant for use in agricultural areas and nature reserves.
Mounting position IM 2001 (IM B35) foot flange gearbox with splined shaft in
horizontal position.
Motor adapter Electric motor has been integrated in the gearbox housing,
by which the smallest possible dimension is achieved.
Optional motor adapter Adapters in conformance with IEC-B5 or NEMA TC.
In case of doubt about the local applicable regulations for the drive connec-
tion, contact your Bredel representative.
Protection class IP55/IK08
Insulation class F
Increase in temperature Within class B
Voltage/frequency 230/400 V - 3 phases - 50 Hz
Recommended lubricants for the Bredel co-axial gearboxes
*