Watson-Marlow DuCoNite 25 - Manual (Page 11)

SAFETY
11
and function of the product. Observing the instructions
in the user's documentation also belongs to intended
use.
Only use the pump in conformance with the intended
use described above. The manufacturer cannot be held
responsible for damage or harm resulting from use that
is not in conformance with the intended use. If you want
to change the application of your hose pump, contact
your Bredel representative first.
2.3 Use in potentially explosive atmospheres
The pump head and gearbox mentioned in this manual
are suitable for use in a potentially explosive
atmosphere. The pumps mentioned meet the
requirements as stated in the European Directive 94/9/
EC (ATEX Directive).
The pumps belong to:
•
Group II Appliances, category 2 GD ck T4
2.4 Use in corrosive atmosphere
The DuCoNite
®
pump head is coated (both in- and
externally) with a corrosion and wear resistant coating.
This coating withstands highly oxidising and reducing
media. Refer to §
10.1.4 for a specification.
2.5 Responsibility
The manufacturer does not accept any responsibility for
damage or harm caused by not (strictly) observing the
safety regulations and instructions in this manual and
the also supplied documentation, or by negligence
during installation, use, maintenance and repair of the
hose pumps mentioned on the front cover. Depending
on the specific working conditions or accessories used,
additional safety instructions can be required.