Watson-Marlow DuCoNite 25 - Manual (Page 25)

INSTALLATION
25
5.4 Lifting and moving the pump
For lifting and moving the pump head, it has been fitted
with a lifting strip. This lifting strip (A) is fitted on the rear
of the pump head. For the weights, refer to §
10.1.6 .
The complete hose pump, i.e. pump head, gearbox and
electric motor, must be lifted using the lifting strip of the
pump head plus additional support using suitably rated
straps or slings (A). For the weights, refer to §
10.1.6 .
5.5 Placing the pump
Position the pump on a horizontal surface. Use suitable
anchor bolts to attach the pump to the floor surface.
WARNING
If the pump is to be lifted ensure that all
standard lifting practices are adhered to
and carried out by qualified personnel only.