Watson-Marlow DuCoNite 25 - Manual (Page 27)

COMMISSIONING
27
2. Make sure that there are no obstructions such
as closed valves.
3. Switch on the hose pump.
4. Check the rotation of the rotor.
5. Check the capacity of the hose pump. If the
capacity differs from your specification, follow
the instructions in chapter
9 or consult your
Bredel representative.
6. Check the capacity range of the frequency
controller. In case of any deviations consult the
documentation of the supplier.
7. Check the hose pump in accordance with points
2 to 4 of the maintenance table from §
7.2 .