Visara SSL1000 - Manual (Page 17)

707092-001 2-7
Chapter 2. Installation and Configuration
156.48.0.0 refers to the 64,534 addresses in the Class “B” network of 156.48.1.1
through 156.48.254.254.
2. Enter the Gateway, the IP address of the router used to reach the destination network.
3. Select the LAN interface which will be used by the SSL1000 to reach the network.
4. Click the
New button. The static routes are stored in the SSL.INI file immediately,
but are loaded in the TCP/IP routing tables at boot time. For these routing changes
to take effect a
Server Reboot is required.
Note: If the network address you entered already existed in the list, an update will
be done.
View details of static routes that have already been defined
1. Select the network address in the scroll box.
2. Click
View . The details will appear in the fields below.
Update any field of an existing static route
1. Select the network address in the scroll box.
2. Click
View . The details will appear in the fields below.
3. Change any necessary information.
4. Click
Update . The new definition will be saved.
Delete an existing static route
1. Select the network address in the scroll box.
2. Click
View . The details will appear in the fields below.
3. Click Delete . The static route will be deleted.
Note: Deleting a static route does not disconnect a current user.
Import Certificates