Visara SSL1000 - Manual (Page 10)

1-4 707092-001
SSL1000 User’s Manual
Control Panel Indicators and Switches
• Overheat
This led indicates that the server is overheating.
• NIC1 and NIC2
These leds will flash when there is activity on LAN 1 and/or LAN 2.
• H DD
This led indicates hard-drive activity.
• Power Indicator
Indicates that power is being supplied to the server.
• Reset Switch
The reset switch reboots the server.
• Power Switch
This switch turns off the server power.
Specifications
Processor - Intel ® Pentium ® IV - 2.4Ghz
Main Memory - 512Mb DDR
Networking - TCP/IP
- 10/100/1000BaseT Ethernet, twisted pair (RJ-45)
I/O Ports - One 3-pin AC power connector
- Two 8-pin female RJ-45 ethernet connectors
- One 15-pin female VGA compatible connector **
- One 6-pin female PS/2 mouse connector **
- One 6-pin female PS/2 keyboard connector **
- One 25-pin female parallel connector **
- Four Universal Serial Bus (2.0) connectors **
Peripheral Bays - One slim 3.5” floppy drive
- One slim CD-ROM drive
Power Supply - Type: 200W
- Input: AC 100~240V
Dimensions - (W x H x D) 16.7” x 1.7” x 14” (425mm x 44mm x 355.6mm )
Weight - Net: Full System: ~9.5 lbs. (4.3 kg.)
Gross: Full System: ~17.5 lbs. (8 kg.)
Environmental - Operating Temperature: 50ºF~90ºF (10ºC~35ºC)
- Operating Humidity: 8% to 80% Non-condensing
Safety Regulation - FCC-B, CE, UL, CUL, TUV, CISPR 22 (EN 55022)
** These connectors are not used on the SSL1000. Do not connect peripheral
equipment to these ports.