Verilink IMUX (880-503137-001) Product Manual - Manual (Page 32)

Configuration Menus
3-6 Verilink IMUX User Manual
Administration
Menu
The commands on the IMUX Administration Menu generate
prompts designed to be self-explanatory and/or contain multiple
choice options.
Figure 3-3 shows the IMUX Card Administration
Menu. The first portion of this menu comes from the SCM
controller.
Table 3-4 defines the IMUX Administration Menu
options.
Figure 3-3 IMUX Administration Menu
Table 3-4 IMUX Administration Menu
Circuit Manager
Circuit building is a primary function of the SCM. For information
on circuit building, refer to Chapter 2,
“Quick Set-Up” and the SCM
User Manual.
Command Description
Q Query Firmware—displays the firmware version found in each
partition (A and B), and which partition the IMUX is currently
booted from.
O Switch Over Permanent—Selects a partition of memory to be
loaded into RAM and executed. Once specified, the
permanent partition of the flash is reloaded and executed
following each power cycle. The permanent status remains
until changed.
R Reset Card—Reinitializes the operation of firmware currently
in RAM.
X Return to the Main Menu .
-- SCM CONTROLLER ADMINISTRATION MENU -- -- SCM CONTROLLER ADMINISTRATION MENU -- -- SCM CONTROLLER ADMINISTRATION MENU -- -- SCM CONTROLLER ADMINISTRATION MENU --
Date/Time/Zone: 05-08-99 22:58:25 GMT (DTS Date/Time/Zone: 05-08-99 22:58:25 GMT (DTS Date/Time/Zone: 05-08-99 22:58:25 GMT (DTS Date/Time/Zone: 05-08-99 22:58:25 GMT (DTS
OFF)
OFF) OFF) OFF)
Node address: [0.0.0.2]
Node address: [0.0.0.2] Node address: [0.0.0.2] Node address: [0.0.0.2]
Node id: 122
Node id: 122 Node id: 122 Node id: 122
Site name: Verilink Technical
Site name: Verilink Technical Site name: Verilink Technical Site name: Verilink Technical
System uptime: 05:02:05
System uptime: 05:02:05 System uptime: 05:02:05 System uptime: 05:02:05
-- IMUX -- CARD ADMINISTRATION -- [1,5] -- -- IMUX -- CARD ADMINISTRATION -- [1,5] -- -- IMUX -- CARD ADMINISTRATION -- [1,5] -- -- IMUX -- CARD ADMINISTRATION -- [1,5] --
Q) query firmware Q) query firmware Q) query firmware Q) query firmware
O) switch over permanent
O) switch over permanent O) switch over permanent O) switch over permanent
R) reset card
R) reset card R) reset card R) reset card
X) exit this menu
X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.2] [1,5] IMUX > A [0.0.0.2] [1,5] IMUX > A [0.0.0.2] [1,5] IMUX > A [0.0.0.2] [1,5] IMUX >