Verilink IMUX (880-503137-001) Product Manual - Manual (Page 15)

Verilink IMUX User Manual 2-1
Chapter
2
Quick Set-Up
The Quick Set-Up section provides the steps necessary to install
and configure a typical IMUX configuration. Refer to the menu
options described in Chapter 3,
“Configuration Menus” when
determining the settings and values for your configuration.
The following assumptions are used in the example configuration
(
Figure 2-1 ):
• An SCM is in slot 1
• An M1-3 multiplexer is in slot 6
• IMUX modules are in slots 5 and 8
• A QUAD T1 is installed in slot 7
Figure 2-1 Configuration Example Module Placement
The following midplane circuits are created in the circuit-build
example (
Figure 2-3 ):
• from QUAD T1 network ports 1 and 2, to the data port on the
IMUX in slot 8, which is supporting a router.
• from M1-3, T1 ports number 9, 10, and 11, to the IMUX module
in slot 5 supporting a router.
NOTE: Adjust one or more of these values to adapt the quick set-up
to your configuration.