Verilink IMUX (880-503137-001) Product Manual - Manual (Page 24)

Quick Set-Up
2-10 Verilink IMUX User Manual
M1-3 to IMUX This example maps the M1-3 (slot 6), T1 number 9, 10, and 11, to
the IMUX module in slot 5. From the M1-3 Main Menu, type "B" to
access the Circuit Build function of the SCM.
1. From the Circuit Build Manager menu, type “A” (Add Circuit).
2. Type “N” (Name Circuit).
Type a name for a new M1-3 to IMUX circuit (for example,
“M13_IMUX”).
3. Type “M” (Mode). Select option 1 (64k).
4. Type “SP” (source port). Enter the shelf number, a comma, and
the slot number of the M1-3 (1,6).
5. Type “DP” (destination port). Enter the shelf number, a
comma, and the slot number for the IMUX in slot 5 (1,5).
6. Type “ST” (source T1) and choose T1 number 9, 10, and 11
(9—11).
7. Type “S” (setup). The circuit manager displays a successful
circuit build.
8. Type “X” to exit to the Circuit Manager Menu. This menu
displays all configured and setup circuits ( Figure 2-8 ).
Figure 2-8 Circuit Manager Menu with Three Circuits
9. Figure 2-9 shows the IMUX Configuration Menu for the IMUX
module in slot 8, after the circuits are built and the system is
functioning from end-to-end. The status information displays
-- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.12 -- -- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.12 -- -- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.12 -- -- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.12 --
Page : 1 Page : 1 Page : 1 Page : 1
Total: 3 circuits
Total: 3 circuits Total: 3 circuits Total: 3 circuits
Name Type Mode Prio Source Port Dest Port Bus Status Name Type Mode Prio Source Port Dest Port Bus Status Name Type Mode Prio Source Port Dest Port Bus Status Name Type Mode Prio Source Port Dest Port Bus Status
------------ ---- ---- ---- ---------------- ---------------- --- ------
------------ ---- ---- ---- ---------------- ---------------- --- ------ ------------ ---- ---- ---- ---------------- ---------------- --- ------ ------------ ---- ---- ---- ---------------- ---------------- --- ------
QUADT1_IMUX1 perm 64k norm [1, 7] QT1 net1 [1, 8] IMUX data AUT Active
QUADT1_IMUX1 perm 64k norm [1, 7] QT1 net1 [1, 8] IMUX data AUT Active QUADT1_IMUX1 perm 64k norm [1, 7] QT1 net1 [1, 8] IMUX data AUT Active QUADT1_IMUX1 perm 64k norm [1, 7] QT1 net1 [1, 8] IMUX data AUT Active
QUADT1_IMUX2 perm 64k norm [1, 7] QT1 net2 [1, 8] IMUX data AUT Active
QUADT1_IMUX2 perm 64k norm [1, 7] QT1 net2 [1, 8] IMUX data AUT Active QUADT1_IMUX2 perm 64k norm [1, 7] QT1 net2 [1, 8] IMUX data AUT Active QUADT1_IMUX2 perm 64k norm [1, 7] QT1 net2 [1, 8] IMUX data AUT Active
M13_IMUX perm 64k norm [1, 6] M1-3 m13 [1, 5] IMUX data AUT Active
M13_IMUX perm 64k norm [1, 6] M1-3 m13 [1, 5] IMUX data AUT Active M13_IMUX perm 64k norm [1, 6] M1-3 m13 [1, 5] IMUX data AUT Active M13_IMUX perm 64k norm [1, 6] M1-3 m13 [1, 5] IMUX data AUT Active
A) add circuit L) search circuit A) add circuit L) search circuit A) add circuit L) search circuit A) add circuit L) search circuit
D) delete circuit E) edit circuit
D) delete circuit E) edit circuit D) delete circuit E) edit circuit D) delete circuit E) edit circuit
P) prev page I) activate circuit P) prev page I) activate circuit P) prev page I) activate circuit P) prev page I) activate circuit
N) next page R) deactivate circuit
N) next page R) deactivate circuit N) next page R) deactivate circuit N) next page R) deactivate circuit
X) exit this menu X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM >