Triplett Fox 2 & Hound 3 – PN: 3399 - Manual (Page 4)

4
• High Output Tracer Tone
• Generates 2 of 6 user selectable Tracer Tones
• Internal User Selectable Settings - HI/LO Pitch Shift,
Warble/Continuous Tracer Tone, On/Off Audio Pilot Tone,
On/Off Cadence Shift
• Tone/Battery LED - indicates that Tracer Tone is on and
battery is OK
• Audio Pilot Tone - confirms the Tracer Toner signal
• Visual & Audible Continuity Test
• Red/Green Telephone Line Polarity LEDs - also indicates
AC/RING Signal
• Supplies “Talk Power” to allow communicating between
handsets (talksets) or powering a telephone
• Line powered in Tone Mode
• Built in Telephone Ringer
• “Power Latch” - prevents accidental turn-ons
• Magnetic Back - stick the Fox 2 to steel surfaces
• Works with either Hound, Hound 2, or Hound 3 Probe
• Powered by standard 9 Volt Battery (not included)
3: Key Features of the HOUND 3
• New Headlights to help light your way in dark areas
and reduce florescent light noise!
• Streamlined Design allows for better access in
hard-to-reach areas
• New Shielded Design to suppress “Feedback Squeal”
• Bandpass Filter to suppress 60Hz and Hi Frequency Noise
• Earphone Jack for use in quiet or noisy environments.
• Improved Sensitivity and Loudness