Triplett Fox 2 & Hound 3 – PN: 3399 - Manual (Page 30)

30
8.1.6: 120VAC Warning:
The FOX 2 provides an audible warning that 120VAC has
been connected to the product. This is intended to provide
the user with a warning that an unexpected potentially dan-
gerous voltage is present. This feature works in all test
modes. When activated, the FOX 2 begins beeping on and
off. The 9 volt battery must be good for this feature to work.
See the Safety Warnings and Cautions section for additional
information concerning this feature.
8.1.7: 120VAC Protection:
The FOX 2 is 120VAC line cross resistant. This means that in
the great majority of cases, the FOX 2 will tolerate the acci-
dental application of 120VAC without damage. This feature
works in all modes. The 9 volt battery is not required for this
to work.
See the Safety Warnings and Cautions section for additional
information concerning this feature.
8.1.8: General Wire Tracing Information:
The FOX 2 has some unique wire tracing features that im-
prove the user’s ability to perform a quick and reliable trace.
When used in conjunction with the HOUND 3, the FOX 2 can
be used to trace and locate wires in cables and in wood frame
construction. There are several common test scenarios . . .
tracing wires through walls or ceilings, tracing wires in
multiwire cables or harnesses, and locating breaks in wires.
In additional to obvious residential and commercial uses,
the FOX and HOUND has also been used on radio towers, in
cars, boats, and even submarines.