Triplett Fox 2 & Hound 3 – PN: 3399 - Manual (Page 11)

11
5.1.6: Audible Continuity:
Beeper sounds when continuity is established
Threshold: Typically 500 to 1000 Ohms with new 9v battery
Open Circuit Voltage: 10v max.
Test Current: 60mA max
5.1.7: Visual Continuity:
LED lights when continuity is established
Threshold: Typically 2K Ohms with new 9v battery
Open Circuit Voltage: 10v max.
Test Current: 30mA max
5.1.8: Talk Power:
Open Circuit Voltage: 10v max.
Current (Short Circuit): 30mA max
Current with 1K Loop: Typically 5mA with new 9v battery
5.1.9: 120VAC Warning:
When in the OFF / POLARITY mode, the Red and Green Po-
larity LEDs light simultaneously when 120VAC is present.
The 9v battery may or may not be installed.
In all modes, the beeper sounds in staccato fashion, i.e. beep-
beep-beep-beep etc. The 9v battery must be good for this to
work.
The applied voltage must not exceed 132VAC 60Hz or dam-
age to the product and user injury may result.