Triplett Fox 2 & Hound 3 – PN: 3399 - Manual (Page 35)

35
TRACER TONE
VISUAL CONT.
TALK
OFF / POLARITY
AUDIBLE CONT.
WARBLE PULSE
CORDLESS INTERFACE
UNLOCK BATTERY TEST
AC / RING
REV NORM
Figure 5
Floating or Line-to-Line Tracing
In the grounded method (also called Line to Ground), one
clip of the FOX 2 (either the red or green) is connected to
earth ground or a “fake ground”, and the other clip is con-
nected to the target wire. The target wire can be one wire of
a pair or a multiwire cable. See Figure 6. This method cre-
ates the strongest tracer tone, and is often used when wires
are traced through walls or ceilings. It is also useful for
identifying a specific wire within a bundle of wires. If con-