Tri Tool 601SBM Clamshell Air - Manual (Page 26)

26
TRI TOOL INC.
92-0092 Rev. 131230
Tool Bit Adjustment
SOCKET WELD REMOVAL
Install the Tool Bit in the Socket Weld Tool Holder (Optional) as show. See the
picture below.
When the Tool Bit first cuts the parent metal, stop the machine and retract the Tool
Holder.
Strike the pipe end and twist it out of the socket.
If the pipe will not separate from the socket, then continue cutting.
After every 3 or 4 revolutions, try again to break the pipe free.
Socket Weld Removal