beautypg.com

Tri Tool 601SBM Clamshell Air User Manual

Page 21

background image

21

Model 601SBM Low Profile Clamshell

92-0092 Rev. 131230

GENERAL MACHINING SEQUENCE

To set Tool Bits, go to “Tool Bit set up”, for set up instructions.

Install the Air Motor into the drive socket and bolt it to the Clamshell.

There are 6 orientations for the Air Motor to allow for clearance. Refer to the picture

“Air Motor alternate positions”.

Air Motor Alternate Positions

Check that the air supply filter/regulator/lubricator is installed and set

properly

NOTE:

The Motor Mount reacts to the torque of the Air Motor only when the Motor

Hold-down bolt is in place.

CAUTION:

See also other documents in the category Tri Tool Equipment: