Tri Tool 600RBL and 600SB Series OD Tracking Module - Manual (Page 7)

7
Model 600 SB and RBL OD Tracking Module
92-0732 Rev. 131009
4. SPECIFICATIONS
4.01 OD TRACKING MODULE
Weight: 31 lbs (14 kg).
Figure: 1. Envelope Model 600SB and RBL OD Tracking Module
4.02 CUTTING CAPACITIES
Range: This information is in the 600SB or the RBL manual for the specific
Clamshell model.
Roundness: Pipe up to 1.5" (38.1 mm) out of round.
Feed Rate: 0 - .004" (0 - .10 mm) per revolution.
4.03 MATERIAL
The materials must have a Rockwell hardness of less than Rc 35, these
materials included but are not limited to: most stainless steels, carbon steels, and
inconels.
4.04 MOUNTING
The OD Tracking Module mounts on the
• 614RBL through the 642RBL Clamshells and the
• 616 SB through the 642SB Clamshells