Tri Tool 600RBL and 600SB Series OD Tracking Module - Manual (Page 6)

6
TRI TOOL INC.
92-0732 Rev. 131009
3. GENERAL DESCRIPTION
The OD Tracking Module is a mechanical accessory for the following Clamshells:
• Models 616SB through 642SB and
• Models 614RBL through 642RBL.
The spring loaded Tool Holder forces the Tracking Wheel against the outside
diameter of the pipe to ensure that the machine beveled preps are consistent
with the outside diameter of the pipe.
The OD Tracking Module is mounted directly on the clamshell in place of the
Clamshells Heavy Duty Tool Modules.
An Adapter Plate provides ease of radial adjustment.
The OD Tracking Module uses standard Tool Bits, which are available in various
configurations from Tri Tool Inc.