Operation, Single point / flange facer – Tri Tool 212B Beveler Single Point Flange Facer User Manual
Page 7
7
92-0729 : Rev. 070928
212B BEVELMASTER
TM
SINGLE POINT / FLANGE FACER
OPERATION
IN GENERAL:
Read the operating instructions carefully before attempting to operate the:
Model 212B Bevelmaster
TM
Single Point.
Model 212B Bevelmaster
TM
ATTACHING THE 212B SINGLE POINT TO THE 212B BEVELMASTER
TM:
Disconnect Power supply from the 212B Bevelmaster.
TM
Remove the Mandrel Shaft and the Tool Holders from the 212B Bevelmaster
TM
and return to the carrying case.
Clean the Main Shaft, bore of the 212B Bevelmaster
TM
and the mounting face of
the Single Point. Locate the location ring of the Single Point in the bore of the
212B Bevelmaster
TM
and secure using the 5 Cap screws provided (P/N 33-0059).
Attach the Motor guard to the Air Motor.
WARNING:
Using the 212B Single Point without the Air Motor Guard may result in
injury to the operator.
GUARD
AIR MOTOR
TRIPPER WHEEL
212B BEVELMASTER™
212B SINGLE POINT
TOOL HOLDER