8 adsl oamlb – Draytek Telnet Command 1.11 User Manual
Page 99
Telnet Command Reference Guide V1.1
93
2.21.8 adsl oamlb
This command is used to test if the connection between CPE and CO is OK or not.
adsl oamlb [n][type]
Syntax Description
n
It means the total number of transmitted packets.
type
It means the protocol that you can use.
1 – for F4 Seg-to-Seg (VP level)
2 – for F4 End-to-End (VP level)
4 – for F5 Seg-to-Seg (VC level)
5 – for F5 End-to-End (VC level)
Example
>adsl oamlb 10 2
Tx cnt=10
Rx Cnt=10