Draytek Telnet Command 1.11 - Manual (Page 8)

Telnet Command Reference Guide V1.1 2
1.2 Valid Commands
The valid commands will differ according to the router and the firmware version that you have.
At present, commands explained in this manual are for Vigor 2700 Series, Vigor 2800 Series
Vigor2910 Series and 2950 Series.
Valid Command Types for Vigor 2700 Series (F/W: V2.6.3_RC1)
upnp ddns exit ip ipf p2p
Im ddos urlf isdn log quit
srv sys register show mngt vpn
wan adsl voip port wol vigbrg
Valid Command Types for Vigor 2800 Series (F/W: V2.7.1_B4_Y01)
upnp ddns exit ip ipf p2p
Im ddos urlf isdn log quit
srv sys register show mngt vpn
wan adsl wl voip port wol
vigbrg portmaptime
Valid Command Types for Vigor 2910 Series (F/W: V3.0.2_RC1a)
upnp ddns exit ip ipf csm
ddos urlf isdn log quit srv
sys register show mngt vpn wan
wl voip port wol
Valid Command Types for Vigor 2950 Series (F/W: V3.0.0)
upnp ddns exit ip ipf csm
ddos urlf log quit srv sys
register show mngt vpn wan wl
wol