Draytek Telnet Command 1.11 - Manual (Page 18)

Telnet Command Reference Guide V1.1 12
2.4.5 ip addr
This command allows users to set/add a specified LAN IP your router.
ip addr [IP address]
Syntax Description
IP address It means the LAN IP address.
Example
>ip addr 192.168.50.1
% Set IP address OK !!!
Note: When the LAN IP address is changed, the start IP address of DHCP server are still the
same. To make the IP assignment of the DHCP server being consistent with this new IP address
(they should be in the same network segment), the IP address of the PC must be fixed with the
same LAN IP address (network segment) set by this command for accessing into the web
configurator of the router. Later, modify the start addresses for the DHCP server.