Draytek Telnet Command 1.11 - Manual (Page 17)

Telnet Command Reference Guide V1.1 11
2.4.4 ip aux
This command allows users to set a specified WAN IP for joining into the NAT Pool. Basically,
the WAN IP has been added in WAN IP Alias but not joined to NAT Pool yet.
ip aux add [IP] [Join to NAT Pool]
ip aux remove [index]
Syntax Description
IP It means the auxiliary WAN IP address.
Join to NAT Pool 0 (disable) or 1 (enable)
[index] Type the index number of the table displayed on your screen.
Example
>ip aux 172.16.3.113 1
>
When you type ip aux?, the current auxiliar WAN IP Address table will be shown as the
following:
Index no. Status IP address NAT IP pool
----------------------------------------------
1 Enable 172.16.3.229 Yes
2 Enable 172.16.3.56 No
3 Enable 172.16.3.113 No