Draytek Telnet Command 1.11 - Manual (Page 126)

Telnet Command Reference Guide V1.1 120
2.23.6.2 voip dsp dialtonepwr
This command allows user to set the dial tone power level.
voip dsp dialtonepwr [channel] [AbsoluteValue]
Syntax Description
channel It means the FXS interface used for VoIP phone. 1 means FXS 1; 2
and means FXS 2.
AbsoluteValue This setting is used to adjust the loudness of the dial tone. The
smaller the number is, the louder the dial tone is. It is recommended
for you to use the default setting (27).
Example
> voip dsp dialtonepwr 1 15
Current power level of dialtone:15 (-8db), channel=1
2.23.6.4 voip dsp ringfeq
This command allows users to set ring frequency for the ring tone.
voip dsp ringfeq [channel] [value]
Syntax Description
channel It means the FXS interface used for VoIP phone. 1 means FXS 1;
and 2 means FXS 2.
value This setting is used to drive the frequency of the ring tone. It is
recommended for you to use the default setting.
Example
> voip dsp ringfeq 1 30
Current ring-feq: 30HZ, channel=1