Draytek Telnet Command 1.11 - Manual (Page 54)

Telnet Command Reference Guide V1.1 48
2.14.1.3 srv dhcp ipcnt
This command allows users to specify IP counts for DHCP server.
srv dhcp ipcnt [?]
srv dhcp ipcnt [IP counts]
Syntax Description
? It means to display current used IP count number.
IP counts It means the number that you have to specify for the DHCP server.
Example
> srv dhcp ipcnt 50
This function need rebooting router, please type "sys reboot" command to reboot
router.
2.14.1.4 srv dhcp off
This function allows users to turn off DHCP server. It needs rebooting router, please type "sys
reboot" command to reboot router.
2.16.1.5 srv dhcp on
This function allows users to turn on DHCP server. It needs rebooting router, please type "sys
reboot" command to reboot router.
2.16.1.6 srv dhcp startip
srv dhcp startip [?]
srv dhcp startip [IP address]
Syntax Description
? It means to display current used start IP address.
IP address It means the IP address that you can specify for the DHCP server as
the starting point.
Example
> srv dhcp startip 192.168.1.53
This function need rebooting router, please type "sys reboot" command to reboot
router.
2.14.1.7 srv dhcp status
This command can display general information for the DHCP server, such as IP address, MAC
address, leased time, host ID and so on.
Example
> srv dhcp status