Draytek Telnet Command 1.11 - Manual (Page 113)

Telnet Command Reference Guide V1.1 107
2.23.3 voip dial_plan
This command allows users to set phone book settings.
voip dial_plan n [-]
voip dial_plan n[…]
Syntax Description
n It means the index number of the VoIP settings.
- The available commands with parameters are listed below:
-d It means the speed dial number, e.g., -d 886.
-c : It means the contact sip url, e.g., -c [email protected]
-n : It means the name of the peer that you want to contact, e.g, -n
david.
-a 1/0 It means to enable (1) or disable (0) this entry.
-m 0/1/2 It means the backup number mode, none (0), ISDN (1) and (2)
PSTN.
-b It means the back number, e.g., 241
-w It means to delete this entry.
-v It means to display current settings.
[…] It means that you can type in several commands in one line
Example
> > voip dial_plan 1 -d 688 -c [email protected] -n david -a 1
> voip dial_plan -v
-------index: 1 active------
phone number: 688
name: david
address: [email protected]
backup number: [mode=0]