Draytek Telnet Command 1.11 - Manual (Page 91)

Telnet Command Reference Guide V1.1 85
2.20 wan
2.20.1 wan ppp_ipcp_vso
This command allows users to enable or disable PPP IPCP VSO (Vendor Specific Option)
function. It is used for specific network.
wan ppp_ipcp_vso [on]
wan ppp_ipcp_vso [off]
wan ppp_ipcp_vso [default]
Syntax Description
on/off It means to enable or disable PPP IPCP VSO.
default It means to recover to the default setting.
Example
> wan ppp_ipcp_vso default
>
2.20.2 ppp_mru
This command allows users to adjust the size of PPP LCP MRU. It is used for specific network.
wan ppp_mru [value]
Syntax Description
value It means the number of PPP LCP MRU. The available range is from
1400 to 1600.
Example
> wan ppp_mru 1450
> wan ppp_mru ?
% wan ppp_mru
% Now: 1450