Draytek Telnet Command 1.11 - Manual (Page 95)

Telnet Command Reference Guide V1.1 89
2.21.3 adsl status
This command can display the link status of the ADSL router and the basic information
between router and CO.
Example
>adsl status
--------------------------- ATU-R Info (annex A) ----------------------------
Running Mode : T1.413 State : HANDSHAKE
DS Actual Rate : 0 bps US Actual Rate : 0 bps
DS maximum Rate : 0 bps US maximum Rate : 0 bps
DS Path Mode : Interleave US Path Mode : Interleave
NE Current Attenuation : 0.0 dB Cur SNR Margin : 0.0 dB
DS actual PSDM(C) : 00000000 US actual PSDM(R) : 00000000
ADSL Firmware Version : E.38.2.23
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 0.0 dB Far SNR Margin : 0.0 dB
CO ITU Version[0] : 00000000 CO ITU Version[1] : 00000000
DSLAM CHIPSET VENDOR : < Unknown >
-----------------------------------------------------------------------------
INTL, DSTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
, USTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 0, intl codeword= 0.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 0, intl codeword= 0.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.
Running>>
FDQ : Off, TCM : Off, EC : Off.
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: E.38.2.23