Dynacord Professional Power Amplifiers - Manual (Page 71)

DPA 8412
dPa 8000 s
eries
71
General DPA 8225 DPA 8412
Load Impedance 50 V / 10 Ω 70 V / 19.6 Ω 100 V / 40 Ω 50 V / 20 Ω 70 V / 39,2 Ω 100 V / 80 Ω
Rated Output Power, 1kHz, THD < 0.5% 250 W 125 W
Rated RMS Voltage Swing, 1kHz, THD=1% 50 V 70 V 100 V 50 V 70 V 100 V
Input Sensitivity, rated power @ rated load, 1kHz 1.55 V (6 dBu)
Voltage Gain ref. 1kHz 30.2 dB 33.1 dB 36.2 dB 30.2 dB 33.1 dB 36.2 dB
THD at rated output power MBW=80kHz, 1kHz < 0.5 %
IMD-SMPTE, 60Hz, 7kHz < 2.0 % < 1.0 %
DIM 30, 3,15kHz, 15kHz < 0.2 % < 0.1 %
Max. Input Level 6.15 V (18 dBu)
Crosstalk, ref. 1 kHz at rated output power < -80 dB
Frequency Response, ref. 1 kHz, rated load 50 Hz...20kHz
Input Impedance, active balanced 20 k Ω
Signal to Noise Ratio, A-weighted > 102 dB
Output Stage Topology Class-D, Transformer, Floating
Power Requirements 115 V / 230 V AC (-10% / +6%), 50-60 Hz or 24 V DC (-10% / +30%)
Power Consumption, at rated Output Power 990 W (Mains) / 900 W (Battery)
Monitor
- rated Output Voltage
- rated Load Impedance 1.3 V (4.5 dBu)
600 Ω
CAN 10...500 kBit/s, 2 x RJ-45
Control Port 1 x 8-pole Euro Block, 3 Control Inputs/Outputs
2 Reference Outputs (15 V, 100 mA/GND), 1 Ready/Fault Output
Protection Audio Limiters, High Temperature, DC, Short Circuit, Mains Over / Undervoltage Protection,
DC Supply Undervoltage Protection, Inrush Current Limiter, Ground Fault
Cooling Front-to-Rear, temperature controlled fans
Ambient Temperature Limits -5 °C .. +45 °C
Safety Class Class I
Dimensions (WxHxD), mm 483 x 88 x 376 mm, 19” / 2 HE
Weight 16 kg 18 kg