Dynacord Professional Power Amplifiers - Manual (Page 67)

PCl s
eries
67
General PCL 1225T PCL 1125T
Load Impedance 8 Ω 4 Ω 100 V 70 V 50 V 100 V 70 V 50 V
Max. Midband Output
(THD < 0.2 %, 20 Hz…20 kHz)
135 W 270 W 270 W 270 W
Rated Output Power
(THD < 0.2 %, 20 Hz…20 kHz)
125 W 250 W 250 W
40 Ω
250 W
19.6 Ω
250 W
10 Ω
250 W
40 Ω
250 W
19.6 Ω
250 W
40 Ω
Channels 2 1
Max. RMS Voltage Swing
(THD = 1 %, 1 kHz)
35.4 V 117 V 82 V 59 V 117 V 82 V 59 V
Voltage Gain (at 1 kHz) 32.2 dB 42.2 dB 39.1 dB 36.2 dB 42.2 dB 39.1 dB 36.2 dB
Power Handling (at 1/8 max. output power, limited pink) - - 330 W - - 170 W - -
Input Sensitivity
(at ROP or Voltage, 1 kHz)
0 dBu (775 mV)
THD (MBW = 80 kHz, 1 kHz) < 0.1 %
Frequency Response
(-1 dB, ref. 1 kHz)
65 Hz – 40 kHz
Input Impedance
(20 Hz…20 kHz symmetr.)
> 20 kΩ
Damping Factor
(at 100 Hz / 1 kHz, 4 Ω)
> 250 - -
Signal to Noise Ratio S/N (A-weighted) 103 dB 103 dB
Power Requirements 230 V / 50 Hz – 60 Hz
Protection audio limiters, thermal overload, peak current limiters, power-on delay
Cooling front to rear
Safety Class I
Dimensions (WxHxD), mm 483 x 88 x 405 mm, 19” / 2 HU
Weight 23.5 kg 16.5 kg
PCL 1415