Dynacord Professional Power Amplifiers - Manual (Page 66)

PCl s
eries
66
PCL Series
technical specifications
General PCL 1415 PCL 1245 PCL 1240T
Load Impedance 8 Ω 4 Ω 8 Ω 4 Ω 8 Ω 4 Ω 100 V 70 V 50 V
Max. Midband Output
(THD < 0.2 %, 20 Hz…20 kHz)
100 W 160 W 300 W 480 W 215 W 430 W 430 W
Rated Output Power
(THD < 0.2 %, 20 Hz…20 kHz)
75 W 150 W 225 W 450 W 200 W 400 W 400W
Channels 4 2 2
Max. RMS Voltage Swing
(THD = 1 %, 1 kHz)
32.1 V 44.7 V 44.7 V 117 V 82 V 59 V
Voltage Gain (at 1 kHz) 30 dB 34.3 dB 34.3 dB 42.2 dB 39.1 dB 36.2 dB
Power Handling (at 1/8 max. output power, limited pink) - 385 W - 530W - - 545 W - -
Input Sensitivity
(at ROP or Voltage, 1 kHz)
0 dBu (775 mV)
THD (MBW = 80 kHz, 1 kHz) < 0.1 %
Frequency Response
(-1 dB, ref. 1 kHz)
< 10 Hz – 40 kHz 65 Hz – 40 kHz
Input Impedance
(20 Hz…20 kHz symmetr.)
> 20 kΩ
Damping Factor
(at 100 Hz / 1 kHz, 4 Ω)
> 250 > 250 -
Signal to Noise Ratio S/N (A-weighted) 101 dB 104 dB 103 dB
Power Requirements 230 V / 50 Hz – 60 Hz
Protection audio limiters, thermal overload, peak current limiters, power-on delay
Cooling front to rear
Safety Class I
Dimensions (WxHxD), mm 483 x 88 x 405 mm, 19” / 2 HU
Weight 18 kg 16.5 kg 26 kg
PCL 1125T