Dynacord Professional Power Amplifiers - Manual (Page 69)

DPA 4411
dPa 4000 s
eries
69
General DPA 4245 DPA 4260
Load Impedance 28.5 Ω / 100V 20 Ω / 100V
14 Ω / 70 V 9.8 Ω / 70 V
1.8 Ω / 25 V 1.25 Ω / 25 V
4 Ω / 37.4 V 4 Ω / 44.7 V
Rated Output Power 350 W (acc. to IEC 268-3 / 19.4) 500 W (acc. to IEC 268-3 / 19.4)
Maximum Output Power 450 W into 4 Ω 600 W into 4 Ω
Output Power in Bridged-Operation 700 W (acc. to IEC 268-3) 1000 W (acc. to IEC 268-3)
Power Output Characteristics: balanced, floating
Input Characteristics: electronically balanced
Input Sensitivity 775 mV / 0 dBu
Input Impedance 20 kΩ
Distortion @ 1kHz and Nom. Outp. Power ≤ 0.1 %
Frequency Response 45 Hz .. 22 kHz (-3 dB)
Signal to Noise Ratio > 100 dB
Output Stage Topology Class-AB, Transformer, Floating
Power Requirements Mains 230 V AC / 50 - 60 Hz
Mains Power Consumption 1714 VA at nominal output 2268 VA at nominal output
635 VA driven at -10 dB 842 VA driven at -10 dB
78 VA no signal 131 VA no signal
Protection audio limiter, thermal overload, DC, HF, Back-EMF, peak current limiter, initial
current inrush limiter, power-on delay,
saturation limitation for output transformers
Cooling Front-to-Rear, temperature controlled
Ambient Temperature Limits +5° C ... +40° C (40° F... 105° F)
Safety Class I
Dimensions (WxHxD), mm 483 x 132.5 x 384 mm, 19” / 3 HU
Installation Depth without Connectors 377 mm
Installation Depth including Connectors max. 437 mm
Weight 20.5 kg 22.5 kg
Color anthracite
Optional Extension-kits for the DPA 4245 / DPA 4260:
NRS 90208 Input transformer (for one input)