Thinklogical ImageEvolution X3 Manual - Manual (Page 5)

Revision D 5 June 2011
2. System Features
2.1. General System Features
The ImageEvolution X3 is a high performance converter and scaler that transitions SDI video
signals into any desired output format and provides the highest quality images for professional
audio-visual end users
. System features include support for up to 8 channels of embedded
audio and ancillary data. Users are able to control the ImageEvolution X3 through its front
panel multi-function selector. RS-232 and RS-422 port are available for remote control of the
unit. An internal AC power supply means no wall wart so the product can easily be stand-alone
or rack mounted.
Each ImageEvolution X3 system includes the following features:
Conversion/Scaling:
• Input and Output: SD, HD-SDI, Dual-link HD-SDI, 3D, 3G*
• Input and output formats supported: progressive, interlaced, PsF
• 3D Processing
• Conversion of dual stream HD-SDI input to side-by-side 3G-SDI or
HD-SDI Output
• Conversion of dual stream HD-SDI input to line interleaved 3G-SDI Output
• Conversion of dual stream HD-SDI input to dual stream HD-SDI Output
• Conversion of side-by-side 3G-SDI or HD-SDI to a 2D right half image
3G-SDI or HD-SDI Output
• Supports Closed Captioning and Time Code Processing
• SMPTE standards supported: 259M-C, 292, 372M, 424M, 425 level A and level B
• Active SMPTE compliant loop out ports
• Internal universal AC power supply
• Supports 8 channels of embedded audio, as well as ancillary data
• 20 user programmable presets
• Genlock Capable (House Sync)
note1: 12-bit max supported on output, 10-bit max supported on input
note2: YCbCr & RGB supported on output, YCbCr supported on input
Video Processor Features:
• Per pixel motion-adaptive video noise reduction- removes the white Gaussian noise
present in most types of video