Thinklogical ImageEvolution X3 Manual - Manual (Page 11)

Revision D 11 June 2011
back to the factory default. (1080i @ 60 at 4:2:2 10-bit mode). See section on
'Restore Factory Config'
User Menu Configurations:
The IEX3 has many configuration options and Appendices A and B will cover these options in
detail. Every configuration can be set regardless of the user interface (e.g. RS-232, RS-422,
Front Panel Display, Web Interface).
5. Regulatory and Safety
5.1 Safety Requirements
5.1.1 Symbols Found on Product
Markings and labels on the product follow industry-standard conventions. Regulatory markings
found on the products comply with requirements.
5.2 Regulatory Compliance
The Thinklogical Inc. products are designed and made in the USA. Our products have been
tested by a nationally recognized testing laboratory and found to be compliant with the following
standards (both domestic USA and many international locations).
5.2.1 North America
These products WILL comply with the following standards:
Safety
• ANSI/UL60950-1: 1 st Edition (2003)
• CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
• FCC CFR47, Part 15, Class A
• Industry Canada ICES-003 Issue 2, Revision 1
5.2.2 Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference,
in which case the user may be required to take adequate measures.