Thermon TESH - Manual (Page 13)

INSTALLATION GUIDELINES SERIES HEATING CABLES PAGE 11
THERMON...The Heat Tracing Specialists ®
TEP0118U-1111
300 mm
For multiple parallel passes refer to illustration alongside.
heating cable FT fixing tape / SS tie wire
Installation on pipe work
Temperature limiter sensor (if applicable)
In principle the heating cable is mounted parallel to
the pipe and fixed by means of FT fixing tape or SS tie
wire. Only if prescribed in the design, the cable must be
covered with aluminium tape.
Description:
FT-1L tape for max. 85 °C
FT-1H tape for max. 260 °C
Stainless steel tie wire to be supplied by electrical
contractor.
4 heating cables 3 heating cables
2 heating cables 1 heating cable
temperature
control
sensor
Note:
For using thermostat limiters, see page 22-documentation.