Tendzone TYCHO T 1212/CA - Manual (Page 6)

II. Software Instructons
Installation of software: the software supports XP, win7, and vista operating systems. Before installing the software, please
make sure the computer net framework3.5 installed. Then, in the IP address of PC, there is at least an address fallen into
the same network segment as the device IP address (the default IP address ex factory is 192.168.10.10). Otherwise, the
device can be queried only and cannot be normally connected. If the PC is not provided with IP address fallen into the
same network segment as the device, please refer to the correct setting in the notes for using the device for the first time
in FAQ hereinafter.
After the PC software is properly installed, the starting interface is as shown in Figure 3:
Figure 3
- Menu bar and tool bar: the menu bar contains various function menus of the software, and the tool bar displays
function menus in common use.
- Copy / paste: parameter copy between channels or parameter copy between same functional module. The interface
choice box is red, indicating that the module can conduct copy / paste operations.
- Channel parameter control area: indicating parameters of various functional modules of each channel. The choice box
is red, indicating that the module can conduct copy / paste operations.
- Input / output channel control area: to display the electrical level and gain of each channel, select any channel, and
the corresponding specific parameters will be displayed in Module 3; part of the hidden channel can be switched
with ;When the channel choice box is red, the channel can conduct copy / paste operations. When the channel choice
box is blue, the parameters of the current channel are displayed in Module (3) .