Teletronics EzBridge 5800 User Manual
Page 9
EzBridge 802.11B Basics
This section is consisted of three parts. You will learn the guise of the hardware, including the ports and LEDs, and the
installation of Access Point.
2.1 Ports
The ports are on the rear panel of the device. Please see the following picture – the rear view of the Access Point to
learn more details about your device.
Antenna Connection
When the Access Point begins to work, you may adjust the angle of the antenna or reposition your Access Point to
obtain a better performance.
LAN Connection
Use Ethernet straight LAN cable to connect your PC, hub/switch or broadband router/modem to this port.
DC 5V Power Input
Use the power adapter which is only supplied with your Access Point.
Set to Default Button
When you press this button, the Access Point will reboot and reset current settings to factory default settings.
2.2 LEDs
The 802.11b EzBridge includes three types of LED indicators. Please check the following picture – the front view of the
Access Point and table to obtain the information on the LED indicators on your Access Point.